EKF - Short Profile
EKF - Short Profile
S48-SSD

Low Profile Mezzanine Module for CompactPCI® Serial CPU Cards

Dual M.2 NVMe SSD Storage • PCI Express®



S48-SSD

Description

Ordering Information

Product Information

Block Diagram

General Information
Mezzanine Connectors

Products One Click

All You Need to Know


S48-SSD • CPU Mezzanine Module

Photo Gallery

1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15


© EKF • Images show up in a secondary browser tab or window


S48-SSD

Low Profile Mezzanine Card for CPU Boards

Dual NVMe® SSD Storage
M.2 PCI Express® up to Gen4


Available as a mezzanine add-on expansion board e.g. to several CompactPCI® Serial and CompactPCI® PlusIO CPU carrier cards, the S48-SSD provides a mass storage solution, by means of one or two M.2 NVMe SSD modules.

For optimum throughput both M.2 sockets can be populated with PCIe® x4 NVMe type SSDs. The S48-SSD accommodates M.2 modules of variable size, starting at 22mm x 30mm (2230) up to 22mm x 80mm (2280), fixed by screw lock.


As an option, the S48-SSD is available with a Type-C front panel connector, suitable also for the DisplayPort alternate mode.

The S48-SSD connects to the mezzanine expansion connectors HSE1 and HSE2 of the CPU carrier board, maintaining the 4HP (20.32mm) total assembly. Latest EKF CPU boards establish a PCIe® Gen4 link via HSE1. The associated M.2 socket therefore can be used for a Gen4 SSD.


S48-SSD • Low Profile CPU Mezzanine Module
-->

S48-SSD

Feature Summary

  General
  • Low profile mezzanine module for EKF CompactPCI® Serial and CompactPCI® PlusIO CPU boards
  • Proprietary size 84.3mm x 95mm
  • Fits basically into the 4HP (20.32mm) envelope of the CPU carrier board
  • Typically delivered as a ready to use assembly unit (including CPU card)
  • Mounting position right (on top of a CPU board)

  Suitable CPU Carrier Cards

  CompactPCI® PlusIO

  • PC7-FESTIVAL

  CompactPCI® Serial

  • SC4-CONCERTO
  • SC5-FESTIVAL
  • SC8-FLUTE
  • SC9-TOCCATA

  M.2 Module Connectors

  M1

  • M.2 NVMe® SSD module socket, key Id M, PCIe® x4 *
  • Sourced via HSE1 mezzanine connector
  • Maximum (theoretical) 64Gbps I/O data transfer rate (Gen4 PCIe® 16GT/s) *
  • Autosense option for SATA SSD (depends on carrier card)
  • Module dimensions 2230/2242/2260/2280, screw fixed (2280 w. mounting clip)
  • Module height (Label) S1-S5 D1-D4
  • Module 3.3V power DC/DC regulator can be switched off/on via I2C (BIOS settings)
* Gen4 supported with latest CPU generation (SC9-TOCCATA)

  M2

  • M.2 NVMe SSD module socket, key Id M, PCIe® x4 *
  • Sourced via HSE2 mezzanine connector
  • Module dimensions 2230/2242/2260/2280, screw fixed
  • Module height (Label) S1-S5 D1-D4
  • Module 3.3V power DC/DC regulator can be switched off/on via I2C (BIOS settings)
* some carrier cards do not support a PCIe® x4 link width via HSE2 - x1 link only

  Type-C Front Panel Connector (Option)
  • Support for Type-C locking plug (dual screw)
  • VBUS over voltage protection
  • USB 3.1 Gen 2 ready (10Gbps SuperSpeed+) for latest CPU chipset generation
  • DisplayPort Alternate Mode (VESA ALT Mode)
  • VBUS power DC/DC regulator can be switched off/on via I2C (BIOS settings)

  Host I/F Connectors HSE1/HSE2
  • High speed mezzanine connectors
  • Suitable for PCI Express® Gen3/4, USB 5G/10G, DisplayPort
  • Bottom mount male connectors HSE1 and HSE2 (high speed expansion)
  • Mating with the corresponding carrier card female connectors
  • Board-to-board height 10.0mm for a 4HP assembly

  HSE1

  • PCI Express® x4 support (wired to first M.2 socket)
  • PCIe® Gen4 supported (depends on carrier card)
  • USB 3.1 Gen2 10Gbps support (dedicated to the optional Type-C USB front panel connector)
  • SATA supported (assigned to first M.2 socket, depends on carrier card)

  HSE2

  • PCI Express® x4 * support (wired to second M.2 socket)
  • DisplayPort (dedicated to Type-C front panel connector configurable for alternate use)
* some carrier cards do not support a PCIe® x4 link width via HSE2 - x1 link only

  Applications
  • Dual M.2 based mass storage (NVMe®/PCIe®)
  • Low profile mezzanine module for EKF CPU Cards
  • 4HP assembly in total for CPU carrier board and S48-SSD mezzanine card
  • Software RAID option
  • Custom specific modifications and alternate design available on request

  Regulation & Environmental
  • Designed & manufactured in Germany
  • ISO 9001 certified quality management
  • Long term availability
  • Rugged solution
  • Coating, sealing, underfilling on request
  • Lifetime application support
  • RoHS compliant
  • Operating temperature -40°C to +85°C industrial temperature range
  • Storage temperature -40°C to +85°C, max. gradient 5°C/min
  • Humidity 5% ... 95% RH non condensing
  • Altitude -300m ... +3000m
  • Shock 15g 0.33ms, 6g 6ms
  • Vibration 1g 5-2000Hz
  • MTBF 116.0 years (S48-P100), 226.6 years (S48-P200) years (MIL-HDBK-217F, SN29500 @+40°C)
  • EC Regulatory EN55035, EN55032, EN62368-1 (CE)

S48-SSD • Low Profile Mezzanine Module

S48-SSD • Low Profile Mezzanine Module

S48-SSD • Simplified Block Diagram

S48-SSD • Simplified Block Diagram
Ordering Information
Please refer to List 21 for popular SKUs